 |
PHM Weld Pin |
| Size | 3 mm | 4 mm | 5 mm | 6 mm | 8 mm | 10 mm | 12 mm | ||
|
Pin Diameter D |
3.00 2.90 |
4.00 3.90 |
5.00 4.88 |
6.00 5.87 |
8.00 7.85 |
10.00 9.83 |
12.00 11.82 |
||
| Head Diameter | A | Tol. | 8.0 + 0.2 - 0.3 |
10.8 + 0.2 - 0.3 |
13.0 ± 0.30 |
15.5 ± 0.30 |
20.0 ± 0.40 |
24.0 ± 0.40 |
25.2 ± 0.40 |
| Head Thickness | H | ± 0.13 | 1.2 | 1.5 | 1.8 | 2.1 | 2.8 | 3.4 | 3.6 |
| Projection Diameter | P | ± 0.13 | 1.40 | 2.03 | 2.40 | 2.74 | 3.30 | 3.68 | 3.81 |
| Projection Height | F | ± 0.05 | 0.53 | 0.76 | 0.93 | 1.04 | 1.27 | 1.44 | 1.52 |
|
Pin Diameter |
3mm | 4mm | 5mm | 6mm | 8mm | 10mm | 12mm | |
|
Length L |
6.0 | PHM 03006 | PHM 04006 | |||||
| 8.0 | PHM 03008 | PHM 04008 | PHM 05008 | PHM 06008 | ||||
| 12.0 | PHM 03012 | PHM 04012 | PHM 05012 | PHM 06012 | ||||
| 16.0 | PHM 03016 | PHM 04016 | PHM 05016 | PHM 06016 | PHM 08016 | |||
| 2+ 0.0 | PHM 05020 | PHM 06020 | PHM 08020 | PHM 10020 | PHM 12020 | |||
| 25.0 | PHM 06025 | PHM 08025 | PHM 10025 | |||||
| 3+ 0.0 | PHM 06030 | PHM 08030 | PHM 10030 | PHM 12030 | ||||
| 4+ 0.0 | PHM 06040 | PHM 08040 | PHM 10040 | |||||
| 5+ 0.0 | PHM 06050 | PHM 08050 | PHM 10050 | PHM 12050 | ||||
 |
The PHM metric weld pin has three identical precision projections on the underside of the head permitting the pin to be used on through-hole applications. These projections also permit exact positioning and balance for optimum welds. In through-hole applications, the head of the pin is welded to the component's metal making a joint stronger then the surrounding area. This great strength makes the PHM weld pin ideal for hinge pins, bearing surfaces, structural supports and stops. |
 |
|
Material: |
C1010 High-Welding |
Tensile Strength: |
60,000 psi | |
| Quality, Low Carbon Steel |
Yield Point: |
30,000 psi | ||
|
Finish: |
Plain, Unless Specified |
Shear Strength: |
30,000 psi | |
|
Elongation 2” |
30% Max. |