 |
SSM Weld Screw |
| Thread Size | M3.5-6g | M4-6g | M5-6g | M6-6g | M8-6g | M10-6g | ||
| Thread Pitch | 0.6 | 0.7 | 0.8 | 1 | 1.25 | 1.5 | ||
| Spade Width | A |
Tolerance |
5.5 | 6.2 | 7.9 | 8.9 | 11.8 | 14.3 |
| Spade Thickness | B | 1.3 | 1.5 | 1.9 | 2.4 | 3.3 | 4.3 | |
| Spade Length | C | Reference | 14 | 15 | 17 | 19 | 22 | 26 |
|
Thread Size |
M3.5 x 0.6-6g | M4 x 0.7-6g | M5 x 0.8-6g | M6 x 1-6g | M8 x 1.25-6g | M10 x 1.5-6g | |
| Length L | 10.0 | SSM 04010 | SSM 05010 | ||||
| 14.0 | SSM 03514 | SSM 04014 | SSM 05014 | SSM 06014 | |||
| Length Tolerance | 16.0 | SSM 04016 | SSM 05016 | SSM 06016 | SSM 08016 | ||
| Up to 25mm | 20.0 | SSM 04020 | SSM 05020 | SSM 06020 | SSM 08020 | ||
| + 0.0 - 0.8 | 25.0 | SSM 04025 | SSM 05025 | SSM 06025 | SSM 08025 | SSM 10025 | |
| Over 25mm to 50mm | 30.0 | SSM 05030 | SSM 06030 | SSM 08030 | SSM 10030 | ||
| + 0.0 - 1.6 | 40.0 | SSM 04040 | SSM 06040 | SSM 08040 | SSM 10040 | ||
| 50.0 | SSM 05050 | SSM 06050 | SSM 08050 | ||||
 |
The SSM spot weld screw has an ideally shaped flat spade at a right angle to the threads. The spade offers dual advantages... it permits welding to or through metal surfaces. The spade has been designed to accommodate various sizes of electrode tips. Because it is a spot weld part, the same settings, electrodes and welding equipment used normally in your production can also be utilized to apply SSM spot weld screws. This screw is used to good advantage in confined areas such as narrow channels, walled corners and in those applications requiring threads offset from component surfaces |
 |
|
Material: |
C1010 High-Welding |
Tensile Strength: |
60,000 psi | |
| Quality, Low Carbon Steel |
Yield Point: |
30,000 psi | ||
|
Finish: |
Plain, Unless Specified |
Shear Strength: |
30,000 psi | |
|
Threads: |
ANSI / ASME B 1.1-1989 |
Elongation 2” |
30% Max. |