 |
RNM Weld Nut |
|
Part Number |
Thread Size / Pitch |
Width |
Thickness |
Length |
Pilot | Projection |
Hole In |
||||
| Dia. | Height | Width | Height | Length | |||||||
| Tol. | Tol. | Tol. | Tol. | Tol. | Tol. | Tol. | |||||
| + 0.1 | + 0.4 | + 0.2 | + 0.3 | + 0.10 | + 0.06 | + 0.4 | |||||
| - 0.1 | - 0.4 | - 0.3 | - 0.1 | - 0.15 | - 0.05 | - 0.4 | |||||
| A | Tol. "A" | B | C | E | F | G | H | I | |||
| RNM 03516 | M3.5 x 0.6-6H | 9.6 | + 0.3 - 0.2 |
2.4 | 16.0 | 4.8 | 0.8 | 2.4 | 0.30 | 2.4 | 5.2 |
| RNM 04016 | M4 x 0.7-6H | 9.6 | + 0.3 - 0.2 |
2.4 | 16.0 | 5.2 | 0.8 | 2.4 | 0.30 | 2.4 | 5.6 |
| RNM 05016 | M5 x 0.8-6H | 9.6 | + 0.3 - 0.2 |
2.4 | 16.0 | 6.0 | 0.8 | 2.4 | 0.30 | 2.4 | 6.4 |
| RNM 06020 | M6 x 1-6H | 13.0 | + 0.2 - 0.4 |
3.2 | 20.5 | 7.6 | 1.2 | 3.2 | 0.58 | 3.2 | 8.0 |
| RNM 08025 | M8 x 1.25-6H | 16.0 | + 0.4 - 0.3 |
3.6 | 25.0 | 9.2 | 2.0 | 3.2 | 0.68 | 3.6 | 9.6 |
| RNM 12028 | M12 x 1.75-6H | 19.0 | + 1.3 - 0.4 |
4.8 | 28.5 | 14.0 | 2.4 | 3.2 | 0.71 | 4.0 | 14.4 |
 |
The slim, clean lines of the metric RNM weld nut, with its self-locating pilot, has earned wide acceptance among designers of metal products. The RNM nut has a pair of rib projections which are precisely located on either side of the threaded hole. This feature assures equal strength when tension is against the weld. A precision pilot greatly speeds feeding by locating itself quickly and positively in the hole. As a result of the pilot being held to close tolerances, the RNM nut is ideal for extreme accuracy demanded in automated production lines. The RNM nut also has good thread depth providing strong secure thread engagement |
 |
|
Material: |
C1010 High-Welding |
Tensile Strength: |
60,000 psi | |
| Quality, Low Carbon Steel |
Yield Point: |
30,000 psi | ||
|
Finish: |
Plain, Unless Specified |
Shear Strength: |
30,000 psi | |
|
Threads: |
ANSI / ASME B 1.1-1989 |
Elongation 2” |
30% Max. |