 |
PNM Weld Nut |
| Number |
Thread Size / Pitch |
Width | Thickness | Length | Pilot | Pilot | Projection |
Hole In Sheet |
|||
| To End | Dia. | Height | Dia. | Height | |||||||
| Tol. | Tol. | Tol. | Tol. | Tol. | Tol. | Tol. | |||||
| + 0.1 | + 0.4 | + 0.4 | + 0.2 | + 0.3 | + 0.10 | + 0.06 | |||||
| - 0.1 | - 0.4 | - 0.4 | - 0.3 | - 0.1 | - 0.15 | - 0.05 | |||||
| A | Tol. "A | B | C | D | E | F | G | H | |||
| PNM 03516 | M3.5 x 0.6-6H | 11.0 | + 0.3 - 0.2 |
2.4 | 16.0 | 4.8 | 4.8 | 0.8 | 4.80 | 0.3 | 5.2 |
| PNM 04016 | M4 x 0.7-6H | 11.0 | + 0.3 - 0.2 |
2.4 | 16.0 | 4.8 | 5.2 | 0.8 | 4.80 | 0.3 | 5.6 |
| PNM 05016 | M5 x 0.8-6H | 11.0 | + 0.3 - 0.2 |
2.4 | 16.0 | 4.8 | 6.0 | 0.8 | 4.80 | 0.3 | 6.4 |
| PNM 06020 | M6 x 1-6H | 13.0 | + 0.4 - 0.3 |
3.2 | 20.5 | 6.4 | 7.6 | 1.2 | 5.60 | 0.58 | 8.0 |
| PNM 08025 | M8 x 1.25-6H | 16.0 | + 0.4 - 0.3 |
3.6 | 25.0 | 7.1 | 9.2 | 2.0 | 7.95 | 0.68 | 9.6 |
| PNM 10028 | M10 x 1.5-6H | 16.0 | + 0.4 - 0.3 |
3.6 | 28.5 | 8.7 | 11.8 | 2.4 | 7.95 | 0.68 | 12.2 |
 |
The PNM weld nut features a strong single button projection which gives a deeper, more penetrating weld than is ordinarily obtained from other types of projections. Thus, the PNM is ideal for use with heavier gage material. |
 |
|
Material: |
C1010 High-Welding |
Tensile Strength: |
60,000 psi | |
| Quality, Low Carbon Steel |
Yield Point: |
30,000 psi | ||
|
Finish: |
Plain, Unless Specified |
Shear Strength: |
30,000 psi | |
|
Threads: |
ANSI / ASME B 1.1-1989 |
Elongation 2” |
30% Max. |