 |
FH Leveler |
| Part Number | Thread Size | Thread Length | Base | |
| Width Across Flats | Thickness Surface | |||
| L | A | B | ||
| FH 2116 | 1/4-20 | 1.000 | 0.563 | 0.093 |
| FH 2120 | 1/4-20 | 1.250 | 0.563 | 0.093 |
| FH 2708 | 5/16-18 | 0.500 | 0.750 | 0.120 |
| FH 2716 | 5/16-18 | 1.000 | 0.750 | 0.120 |
| FH 2720 | 5/16-18 | 1.250 | 0.750 | 0.120 |
| FHS 2723 * | 5/16-18 | 1.500 | 0.750 | 0.120 |
| FH 2724 | 5/16-18 | 1.500 | 0.750 | 0.120 |
| FH 3320 | 3/8-16 | 1.250 | 0.875 | 0.140 |
| FHS 3323 * | 3/8-16 | 1.500 | 0.875 | 0.140 |
| FH 3324 | 3/8-16 | 1.500 | 0.875 | 0.140 |
| FHS 3331 * | 3/8-16 | 2.000 | 0.875 | 0.140 |
| FHS 3339 * | 3/8-16 | 2.500 | 0.875 | 0.140 |
| FH 3340 | 3/8-16 | 2.500 | 0.875 | 0.140 |
| FH 4440 | 1/2-13 | 2.500 | 1.063 | 0.171 |
|
* FHS specifies a slotted end for screwdriver adjustments |
||||
|
Length (L) Tolerance To 1 Inch + .0 -.03 Over 1" to 2" (Inclusive) + .0 -.06 Over 2" + .0 -.09 |
||||
 |
The FH leveler is strong, economical and one piece construction. Rolled threads extend full length for maximum adjustment. Exposed base prevents dirt buildup and offers the advantage of easy cleaning. Base is beveled to facilitate moving. Easily adjusted with standard wrenches, several sizes are available with a slotted end for screw driver adjustments. |
|
Material: |
C1010 High-Welding |
Tensile Strength: |
60,000 psi | |
| Quality, Low Carbon Steel |
Yield Point: |
30,000 psi | ||
| Finish: | Plain, Unless Specified |
Shear Strength: |
30,000 psi | |
|
Threads: |
Unified Standard Class 2A |
Elongation 2” |
30% Max. | |
| ANSI / ASME B 1.1-1989 |