 |
|
BTM Weld Bracket |
| Part Number | Thread Size / Pitch |
Width | Thick | Length
of Leg From End to Angle |
Ctr.
Of Hole To Angle |
Pilot | Projection | ||||
| Dia. | Hgt. | Width | Hgt. | Length | |||||||
| Tol. | Tol. | Tol. | Tol. | Tol. | Tol. | Tol. | Tol. | Tol. | Tol. | ||
| + 0.4 - 0.3 |
+ 0.1 - 0.1 |
+ 0.4 - 0.4 |
+ 0.4 - 0.4 |
+ 0.3 - 0.5 |
+ 0.2 - 0.3 |
+ 0.3 - 0.1 |
+ 0.10 - 0.15 |
+ 0.08 - 0.07 |
+ 0.4 - 0.4 |
||
| A | B | C | C1 | D | E | F | G | H | I | ||
| BTM 04008 | M4 x 0.7-6H | 13.0 | 3.2 | 12.7 | 15.9 | 8 | None | None | 2.4 | 0.3 | 2.4 |
| BTM 04011 | M4 x 0.7-6H | 13.0 | 3.2 | 15.1 | 16.6 | 10 | None | None | 2.4 | 0.3 | 2.4 |
| BTM 05011 | M5 x 0.8-6H | 13.0 | 3.2 | 15.1 | 16.6 | 10 | None | None | 2.4 | 0.3 | 2.4 |
| BTM 06012 | M6 x 1-6H | 13.0 | 3.2 | 19.1 | 19.1 | 12 | 7.6 | 1.2 | 2.8 | 0.5 | 3.2 |
| BTM 08016 | M8 x 1.25-6H | 16.1 | 3.6 | 25.4 | 25.4 | 16 | 9.2 | 2.0 | 3.6 | 0.63 | 3.6 |
 |
The metric BTM weld bracket, with its dual-line projections, provides a threaded hole at a right angle to the component to which it is welded. The BTM is welded without drilling or punching a hole because it is attached to and not through the surface. The dual-line projections contain the right amount of metal, are uniform in height and length to assure a sound permanent offset thread to which the mating parts can be quickly and firmly attached. In the larger thread sizes, there is a pilot that insures the proper thread engagement. |
 |
|
Material: |
C1010 High-Welding |
Tensile Strength: |
60,000 psi | |
| Quality, Low Carbon Steel |
Yield Point: |
30,000 psi | ||
|
Finish: |
Plain, Unless Specified |
Shear Strength: |
30,000 psi | |
|
Threads: |
ANSI / ASME B 1.1-1989 |
Elongation 2” |
30% Max. |