SP Weld Pin

Body Diameter D 0.117
0.113		 0.144
0.139		 0.163
0.158		 0.190
0.185		 0.218
0.212		 0.250
0.244		 0.277
0.271
Spade Width (Ref.) A 0.218 0.250 0.312 0.406 0.375 0.410 0.437
Spade Thickness B 0.052
0.042		 0.068
0.058		 0.068
0.058		 0.068
0.058		 0.099
0.089		 0.120
0.110		 0.130
0.120
Spade Length Overall (Ref.) C 0.562 0.625 0.688 0.688 0.750 0.750 0.875

Body Diameter

D

 0.117 0.144 0.163 0.190 0.218 0.250 0.277
Length L 3/8       SP 1906      
(Overall)   1/2 SP 1108 SP 1408 SP 1608 SP 1908 SP 2108 SP 2508  
Tolerance   5/8   SP 1410   SP 1910 SP 2110 SP 2510 SP 2710
+.000   3/4   SP 1412   SP 1912 SP 2112 SP 2512  
-.031   1   SP 1416   SP 1916 SP 2116 SP 2516 SP 2716

 

The SP spot weld pin, with its spot weld spade at a right angle to the body, makes it ideal for use as a sturdy hinge pin or bearing surface. SP pins are used extensively in confined areas, channels and other limited access areas where such a part with a long, narrow spade is to be spot welded into place

These pins have been developed to be welded with the same tips and weld setups used to join light assemblies and sheets in other operations. In this way the speed, economy and efficiency of spot welding for regular production is utilized to make highly dependable fastening foundations.

 

Material Information

Material:

 C1010 High-Welding  

Tensile Strength:

 60,000 psi
  Quality, Low Carbon Steel  

Yield Point:

 30,000 psi

Finish:

 Plain, Unless Specified  

Shear Strength:

 30,000 psi
     

Elongation 2”

 30% Max.