PHZ Weld Pin

Body Diameter D 0.119
0.114		 0.144
0.140		 0.163
0.159		 0.190
0.185		 0.218
0.213		 0.250
0.244		 0.277
0.271		 0.335
0.328		 0.375
0.368		 0.500
0.492

Head

 A-Diameter 0.323
0.303		 0.385
0.365		 0.448
0.428		 0.510
0.490		 0.575
0.550		 0.635
0.610		 0.755
0.725		 0.880
0.850		 0.880
0.850		 1.005
0.975
H-Height 0.052
0.042		 0.068
0.058		 0.068
0.058		 0.083
0.073		 0.083
0.073		 0.083
0.073		 0.099
0.089		 0.114
0.104		 0.130
0.120		 0.146
0.136

Projections

 P-Diameter 0.055
0.045		 0.075
0.065		 0.085
0.075		 0.095
0.085		 0.105
0.095		 0.105
0.095		 0.125
0.115		 0.135
0.125		 0.135
0.125		 0.155
0.145
F-Height 0.022
0.018		 0.027
0.023		 0.032
0.028		 0.037
0.033		 0.042
0.038		 0.042
0.038		 0.047
0.043		 0.052
0.048		 0.052
0.048		 0.062
0.058

Body Diameter

 0.119 0.144 0.163 0.190 0.218 0.250 0.277 0.335 0.375 0.500

Length L
(Under Head)
Tolerance To 1
+.00 -.03
Over 1" to 2
(Inclusive)
+.00 -.06

 1/4   PHZ 1404   PHZ 1904            
5/16 PHZ 1105 PHZ 1405 PHZ 1605     PHZ 2505        
3/8 PHZ 1106 PHZ 1406   PHZ 1906 PHZ 2106 PHZ 2506        
1/2 PHZ 1108 PHZ 1408 PHZ 1608 PHZ 1908 PHZ 2108 PHZ 2508   PHZ 3308 PHZ 3708  
5/8   PHZ 1410   PHZ 1910   PHZ 2510   PHZ 3310 PHZ 3710  
3/4       PHZ 1912   PHZ 2512 PHZ 2712   PHZ 3712 PHZ 5012
1       PHZ 1916   PHZ 2516   PHZ 3316 PHZ 3716  
1-1/8                   PHZ 5018
1-1/4       PHZ 1920   PHZ 2520     PHZ 3720  
2           PHZ 2532     PHZ 3732  

 

The PHZ stainless steel weld pin has three identical precision projections on the underside of the head permitting the pin to be used on through-hole applications. These projections also permit exact positioning and balance for optimum welds. In through-hole applications, the head of the pin is welded to the component's metal making a joint stronger then the surrounding area. This great strength makes the PHZ weld pin ideal for hinge pins, bearing surfaces, structural supports and stops.

 

Material and Thread Information

Material:

 18-8 Stainless Steel  

Tensile Strength:

 80,000 psi

Finish:

 Passivated  

Yield Point:

 35,000 psi
     

Elongation 2”

 55% Max.