PH Weld Pin

Body Diameter

 D 0.117
0.114		 0.144
0.140		 0.163
0.159		 0.190
0.185		 0.218
0.213		 0.250
0.244		 0.277
0.271		 0.335
0.328		 0.375
0.368		 0.500
0.492
Head A-Diameter 0.323
0.303		 0.385
0.365		 0.448
0.428		 0.510
0.490		 0.575
0.550		 0.635
0.610		 0.755
0.725		 0.880
0.850		 0.880
0.850		 1.005
0.975
H-Height 0.052
0.042		 0.068
0.058		 0.068
0.058		 0.083
0.073		 0.083
0.073		 0.083
0.073		 0.099
0.089		 0.114
0.104		 0.130
0.120		 0.146
0.136
Projections P-Diameter 0.055
0.045		 0.075
0.065		 0.085
0.075		 0.095
0.085		 0.105
0.095		 0.105
0.095		 0.125
0.115		 0.135
0.125		 0.135
0.125		 0.155
0.145
F-Height 0.022
0.018		 0.027
0.023		 0.032
0.028		 0.037
0.033		 0.042
0.038		 0.042
0.038		 0.047
0.043		 0.052
0.048		 0.052
0.048		 0.062
0.058

Body Diameter

 0.117 0.144 0.163 0.190 0.218 0.250 0.277 0.335 0.375 0.500

Length
(Under Head)
 Tolerance To 1
+.00 -.03
Over 1" to 2"
 (Inclusive)
 +.00 -.06

L

 1/4   PH 1404   PH 1904            
5/16 PH 1105 PH 1405 PH 1605     PH 2505        
3/8   PH 1406   PH 1906 PH 2106 PH 2506        
1/2 PH 1108 PH 1408 PH 1608 PH 1908 PH 2108 PH 2508   PH 3308 PH 3708  
5/8   PH 1410   PH 1910   PH 2510   PH 3310 PH 3710  
3/4       PH 1912   PH 2512 PH 2712   PH 3712 PH 5012
1.0       PH 1916   PH 2516   PH 3316 PH 3716  
1-1/8                   PH 5018
1-1/4       PH 1920   PH 2520     PH 3720  
2.0           PH 2532     PH 3732  

 

The PH weld pin has three identical precision projections on the underside of the head permitting the pin to be used on through-hole applications. These projections also permit exact positioning and balance for optimum welds. In through-hole applications, the head of the pin is welded to the component's metal making a joint stronger then the surrounding area. This great strength makes the PH weld pin ideal for hinge pins, bearing surfaces, structural supports and stops.

 

Material Information

Material:

 C1010 High-Welding  

Tensile Strength:

 60,000 psi
  Quality, Low Carbon Steel  

Yield Point:

 30,000 psi

Finish:

 Plain, Unless Specified  

Shear Strength:

 30,000 psi
     

Elongation 2”

 30% Max.