 |
JD Weld Pin |
|
Part Number |
Body Diameter |
Length |
Spade |
Projection |
|||
| Width | Thickness | Length | Dia. | Height | |||
| D | L | A (Ref.) | B | C (Ref.) | G | H | |
| JD 2124 | 0.218 0.212 |
1.500 | 0.375 | 0.099 0.089 |
0.750 | 0.165 0.155 |
0.027 0.021 |
 |
A JD weld pin has two uniform weld projections on a flat offset spade. These two projections fuse in a neat weld leaving the exterior surface of the sheet virtually unmarred, yet is as strong as if the pin was a part of the sheet. Excellent when a pin must be attached to the edge or the end of the sheet. Functioning well as a hinge pin or a pivot point. |
 |
|
Material: |
C1010 High-Welding |
Tensile Strength: |
60,000 psi | |
| Quality, Low Carbon Steel |
Yield Point: |
30,000 psi | ||
|
Finish: |
Plain, Unless Specified |
Shear Strength: |
30,000 psi | |
|
Elongation 2” |
30% Max. |