 |
WS Weld Nut |
|
Part Number |
Thread Size |
Width |
Thick. |
Projection |
|
| Width | Height | ||||
| A | B | G | H | ||
| WS 1102 | # 6-32 | 0.438 0.423 |
0.116 0.106 |
0.083 0.073 |
0.027 0.023 |
| WS 1401 | # 8-32 | 0.438 0.423 |
0.195 0.185 |
0.083 0.073 |
0.027 0.023 |
| WS 1501 | # 10-24 | 0.438 0.423 |
0.195 0.185 |
0.083 0.073 |
0.027 0.023 |
| WS 1601 | # 10-32 | 0.438 0.423 |
0.195 0.185 |
0.083 0.073 |
0.027 0.023 |
| WS 2101 | 1/4-20 | 0.500 0.485 |
0.195 0.185 |
0.083 0.073 |
0.031 0.027 |
| WS 2102 | 1/4-20 | 0.562 0.547 |
0.226 0.216 |
0.099 0.089 |
0.037 0.033 |
| WS 2701 | 5/16-18 | 0.562 0.547 |
0.226 0.216 |
0.099 0.089 |
0.037 0.033 |
| WS 3301 | 3/8-16 | 0.625 0.610 |
0.257 0.247 |
0.114 0.104 |
0.037 0.033 |
 |
The WS weld nut is a square nut with four projections located to provide proper seating and sturdy positive welds. It also has deep threads for secure engagement and strength. The WS weld nut is also countersunk on both sides to guide the mating screw quickly into the threads. Rounded corners on the WS weld nut ease use in confined areas. The WS is easily fixtured for rapid welding by a locator pin in the electrode. |
 |
|
Material: |
C1010 High-Welding |
Tensile Strength: |
60,000 psi | |
| Quality, Low Carbon Steel |
Yield Point: |
30,000 psi | ||
|
Finish: |
Plain, Unless Specified |
Shear Strength: |
30,000 psi | |
|
Threads: |
Unified Standard Class 2B |
Elongation 2” |
30% Max. | |
| ANSI / ASME B 1.1-1989 |