 |
WFZ Weld Nut |
| Part | Thread | Thickness | Body | Flange | Projection | ||
| Number | Size | (Overall) | Diameter | Dia. | Height | Dia. | Height |
| L | D | A | H | P | F | ||
| WFZ 1105 | #6-32 | 0.327 0.307 |
0.218 0.213 |
0.510 0.480 |
0.068 0.058 |
0.085 0.075 |
0.032 0.028 |
| WFZ 1405 | #8-32 | 0.327 0.307 |
0.250 0.244 |
0.510 0.480 |
0.068 0.058 |
0.085 0.075 |
0.032 0.028 |
| WFZ 1537 | #10-24 | 0.390 0.370 |
0.277 0.271 |
0.630 0.600 |
0.090 0.080 |
0.105 0.095 |
0.042 0.038 |
| WFZ 1637 | #10-32 | 0.390 0.370 |
0.277 0.271 |
0.630 0.600 |
0.090 0.080 |
0.105 0.095 |
0.042 0.038 |
| WFZ 2150 | 1/4-20 | 0.515 0.494 |
0.375 0.367 |
0.815 0.785 |
0.114 0.104 |
0.135 0.125 |
0.052 0.048 |
| WFZ 2709 | 5/16-18 | 0.577 0.567 |
0.450 0.442 |
1.005 0.970 |
0.130 0.120 |
0.155 0.145 |
0.062 0.058 |
| WFZ 3310 | 3/8-16 | 0.640 0.620 |
0.500 0.492 |
1.005 0.970 |
0.130 0.120 |
0.155 0.145 |
0.062 0.058 |
 |
On the WF weld nut, the projections are located right on the top of the flange to permit welding to (rather than through) the surface of the component. Three precision projections of uniform height and mass are properly positioned on the flange to assure a weld that leaves the exterior surface of the component virtually unmarred. |
 |
|
Material: |
18-8 Stainless Steel |
Tensile Strength: |
80,000 psi | |
|
Finish: |
Passivated |
Yield Point: |
35,000 psi | |
|
Threads: |
Unified Standard Class 2B |
Elongation 2” |
55% Max. | |
| ANSI / ASME B 1.1-1989 |