 |
ND Weld Nut |
|
Part Number |
Thread Size |
Width |
Thick. |
Length |
Pilot |
Hole In |
|
| Dia . | Hgt. | ||||||
| A | B | C | E | F | |||
| ND 1114 | #6-32 | 0.453 0.433 |
0.097 0.091 |
0.890 0.860 |
0.198 0.178 |
0.03 | 0.203 |
| ND 1414 | #8-32 | 0.453 0.433 |
0.097 0.091 |
0.890 0.860 |
0.213 0.193 |
0.03 | 0.219 |
| ND 1514 | #10-24 | 0.453 0.433 |
0.097 0.091 |
0.890 0.860 |
0.244 0.224 |
0.03 | 0.250 |
| ND 1714 | #10-32 | 0.453 0.433 |
0.097 0.091 |
0.890 0.860 |
0.244 0.224 |
0.03 | 0.250 |
| ND 2116 | 1/4-20 | 0.453 0.433 |
0.097 0.091 |
1.015 0.985 |
0.291 0.271 |
0.03 | 0.297 |
| ND 2118 | 1/4-20 | 0.520 0.495 |
0.128 0.122 |
1.140 1.110 |
0.307 0.287 |
0.05 | 0.312 |
| ND 2724 | 5/16-18 | 0.655 0.620 |
0.145 0.139 |
1.515 1.485 |
0.369 0.349 |
0.08 | 0.375 |
| ND 3324 | 3/8-16 | 0.655 0.620 |
0.145 0.139 |
1.515 1.485 |
0.448 0.428 |
0.09 | 0.453 |
|
|
The ND weld nut is a dual-tab spot weld nut designed for applications requiring additional strength where tension is against the weld. The location of the twin-tabs enables the ND to be used in bridging corners and recessed areas. A precision pilot speeds location and provides a full thread engagement. The ND can use the same electrodes, equipment and settings used in production, thus eliminating setup and changeover time, thereby lowering in-place-fastener cost. |
|
|
Material: |
C1010 High-Welding |
Tensile Strength: |
60,000 psi | |
| Quality, Low Carbon Steel |
Yield Point: |
30,000 psi | ||
|
Finish: |
Plain, Unless Specified |
Shear Strength: |
30,000 psi | |
|
Threads: |
Unified Standard Class 2B |
Elongation 2” |
30% Max. | |
| ANSI / ASME B 1.1-1989 |